RME Digiface Dante 256-Channel USB Audio Interface

SKU: RME-DIGIFACEDANTE

$2,499.00
Shipped within 24 hours when in stock.
Share:


The RME Digiface Dante is an audio interface that combines USB 3.0, MADI, and DANTE formats to give you up to 256 channels of digital connectivity.


 

The RME Digiface Dante is an audio interface that combines USB 3.0, MADI, and DANTE formats to give you up to 256 channels of digital connectivity allowing you to route and mix digital audio coming from multiple sources. It does this at low latency and also gives you the TotalMix FX bundle to apply processing to all of your sub mixes. With various channel configurations, it can operate at sample rates of up to 192 kHz and at resolutions of 24 bits.

On the front of the unit, you'll find four RJ45 Ethernet ports for Dante connections. These ports support both 100 Mb/s and 1 Gb/s, and can be used in Switched or Redundancy modes. It also features 2 BNC sockets for MADI I/O or wordclock connections and a 1/4" headphone output. The headphone output can monitor any audio channel and can also supply an analog stereo mix-down connection.

The rear of the Digiface Dante sports a USB connection for USB 3.0 and USB 2.0 at reduced channel counts (64 channels, Dante only). The unit is bus-powered the unit over USB, but it's recommended that you use the included power supply if you're running all four network connections and the headphone output at once.

To aid you in routing and mixing signals, the Digiface Dante ships with TotalMix FX. Also included is DiGiCheck DSP, utility software that provides tools to test, measure, and analyse digital audio streams. These tools include peak metering, RMS metering, standardised loudness metering, a vector audio scope, bit statistics, a spectral analyser, and more.

 

Features

• 64 channels Dante (AES67), 64 channels MADI

• 32 channels 24-bit / 96 kHz of record/playback on both Dante and MADI 

• 16 channels 24-bit / 192 kHz of record/playback on both Dante and MADI 

• Slave and Master clock modes 

• MADI, internal, or Dante clock sources

• 4 x Gigabit Ethernet port, 100 Mb/s compatible

• TotalMix 4096 channel mixer with 46-bit internal resolution, for latency-free sub mixes and ASIO Direct Monitoring

• Analog/Line headphone output, separate output for independent sub mix

• DIGICheck DSP for metering needs

• Standalone mode with Dante-to-MADI/MADI-to-Dante converter functionality

 

For more information, please visit the RME website.

 

 

For full specifications, please visit the manufacture's website.

 

SKU RME-DIGIFACEDANTE
Barcode # 4260123363208
Brand RME
Type Genuine

Be The First To Review This Product!

Help other Musiclab users shop smarter by writing reviews for products you have purchased.

Write a product review